|
Septic tank maintenance is an important aspect of septic system maintenance. This article will cover the most common signs of septic system problems, how to clean a septic tank, and how to prevent a tank overflow. These issues can be a significant inconvenience if they aren’t addressed on time. Hopefully, the following tips will help you avoid them. Read on to learn more about septic tank maintenance. Signs ofOne of the first signs that your septic tank needs pumping is if your toilets and drains are frequently backing up. When this occurs, you may need to call a professional to inspect the system. Other signs include gurgling sounds, slow drainage, and a decreased flush rate. When you notice any of these symptoms, contact a professional septic service immediately to avoid a costly situation. If you notice your lawn has grown more than usual, it may be a sign of poor septic system maintenance. In some cases, tree roots may be causing the issue. Another sign is if you notice an overly green lawn in the area of your drain field. This is because sewage is a natural fertilizer that can enhance plant life in the area. To determine if your septic system needs to be serviced, contact a reputable plumbing service today. Cleaning a septic tankIf you live in a home without city sewage, you have to clean a septic tank. The process is not easy, but it can be done by a skilled septic tank professional. Having a strong stomach, expert knowledge, and patience are all necessary to clean a septic tank properly. Here are some steps that can make the job easier. Before you begin, make sure that the tank is above ground and has a lid. To begin, you must first remove the scum layer. This layer will eventually mix with the liquid part of the tank. Next, you need to pump out this liquid, and inject it into the bottom of the tank. You should do this through a large central manhole to avoid damaging the tank’s baffles and ruining the leach field. If you do not do this, you could also damage the septic system and cause additional damage. Performing a septic system inspectionPerforming a septic system inspection is necessary for the proper functioning of your septic system. It will help you identify any problems, such as the presence of leaks or clogging of the drain field. Additionally, a septic system inspection will help you identify whether there are rust spots or corrosion on the septic tank and its parts. The following are the steps that should be followed when performing a septic system inspection for septic tank maintenance. A septic inspection should be done at least once a year, or more frequently if you’ve had issues with the drainage area. To perform a visual septic inspection, run water through the house to determine how much water flows in and out of the tank. Check the drain field to determine whether there’s any standing water, as this can mean the presence of a cesspool. A full septic inspection will reveal if your tank is clogged or if it’s due for pumping. Preventing overflowingIf you notice that the water level is rising in your septic tank, you should take immediate action to prevent it from overflowing. To check the water level, choose a spot within 10 feet of the tank and 20 feet from the drain field. If you see a water level above these levels, you should immediately stop using your septic system until the water table drops. After the water level is below the desired level, you should begin using the system sparingly again. A septic tank needs naturally occurring bacteria to break down solid wastes. When these bacteria are absent, solid wastes accumulate and overflow the tank. If solids build up, they can cause drainage pipes or trenches to clog. It is important to avoid flushing harsh chemicals into the tank and drains to keep these bacteria in balance. Also, make sure to regularly check the alarms and effluent pump. |
